ORBITF435

Other Функции​

• SD Card Slot: Up to 4GB
• Аппаратное обеспечение Inverter: Yes
• Power input: 2S - 6S LiPo (note: output will be lower than 10V when using 2S).
• Power output: 3.3V/500mA, 4.5V-5V/2.5A, 10V/3A
• RSSI input: RSSI input solder pad
• I2C: Used for external magnetometer (GPS module), Barometer module
• ESC: 8 pwm pins for motors
• Buzzer: Buz+ (5V) and Buz- pad used for 5V Buzzer

Input/Output​

• USB Connector: USB Type-C
• Motor Outputs: 8x
• UARTs: 6x
• I2C: Yes
• SWD: Yes
• SPI: No
• 3.3V Output: Yes
• 4.5V (VBUS) Output: Yes
• 5V Output: 2.5A
• 10V Output: 3A
• Current Sensor: No
• Analog RSSI Input: Yes
• LED Strip Output: Yes
• Buzzer Output: Yes

Pads​

UARTs​

Имя	Label	Notes
UART 1	T1/R1	Digital VTX Telemetry
UART 2	T2/R2	Inverted - SBUS
UART 3	R3	ESC Telemetry
UART 4	T4/R4
UART 5	T5/R5
UART 6	T6/R6	GPS

RECEIVER (SBUS + ELRS)​

Имя	Label	Notes
SBUS	SBUS (R2)	SBUS/F.port (serialrx_inverted should be OFF)
USART2_TX	T2
USART2_RX	R2
4V5	4V5
GND	G
3V3	3V3
RSSI	RS	Analog Channel for RSSI

Power​

Имя	Label	Count	Notes
3.3V	3V3	1x	500mA max.
4.5V	4V5	3x	2.5A max.
5V	5V	2x	2.5A max.
10V	10V	1x	3A max.
Battery	BAT	2x	2-6S Input

ESC Signal​

Имя	Label	Notes
Battery	BAT	2-6S Input
GND	G
Current	C
USART3_RX	T	ESC Telemetry
Signal 1	M1
Signal 2	M2
Signal 3	M3
Signal 4	M4
Signal 5	M5
Signal 6	M6
Signal 7	M7
Signal 8	M8

Analog Video​

Имя	Label	Notes
Video In	CAM	Camere Input
Camera Control	CC	Camera Control
Video Out	VTX	OSD output

Buzzer​

Имя	Label	Notes
Buzzer +	BZ+
Buzzer -	BZ-

LED Strip Output (WS2882)​

Имя	Label	Count	Notes
LED	LED	1x	Strip LED output for WS2882

I2C​

Имя	Label	Notes
Clock	SCL
Data	SDA

SWD​

Имя	Label	Notes
SWC	SWC
SWD	SWD
GND	G
3.3V	3V3

Connectors​

ESC 1-4 (JST-SH 8 pins)​

Pin	Имя	Label
1	Battery	BAT
2	Ground	G
3	Current	C
4	Telemetry	T
5	Signal 1	M1
6	Signal 2	M2
7	Signal 3	M3
8	Signal 4	M4

Digital VTX (JST-SH 6 pins)​

Pin	Имя	Label
1	10V	10V
2	GND	G
3	USART1_TX	T1
4	USART2_RX	R1
5	GND	G
6	SBUS	SBUS (R2)